Chapter 7 Wireless
VMG3312-T20A User’s Guide
101
The following table describes the labels in this screen.
7.3 The Guest/More AP Screen
This screen allows you to enable and configure multiple Basic Service Sets (BSSs) on the VMG.
Click Network Setting > Wireless > Guest/More AP. The following screen displays.
The following table introduces the supported wireless networks..
Figure 39 Network Setting > Wireless > Guest/More AP
Table 20 Wireless > General: More Secure: WPA2-PSK
LABEL DESCRIPTION
Security Level Select More Secure to enable WPA2-PSK data encryption.
Security Mode Select WPA-PSK, WPA2-PSK or WPA-WPA2-PSK from the drop-down list box.
Generate
password
automatically
Select this option to have the VMG automatically generate a password. The password field will
not be configurable when you select this option.
Password If you did not select Generate password automatically, you can manually type a pre-shared key
from 8 to 64 case-sensitive keyboard characters.
Select password unmask to display the entered password in plain text. Clear it to hide the
password to avoid shoulder surfing.
more.../hide Click more... to show more fields in this section. Click hide to hide them.
Encryption Select the encryption type (TKIP, AES or TKIP+AES) for data encryption.
Select TKIP if your wireless clients can all use TKIP.
Select AES if your wireless clients can all use AES.
Select TKIP+AES to allow the wireless clients to use either TKIP or AES.
Group Key
Update Timer
The Group Key Update Timer is the rate at which the RADIUS server sends a new group key out to
all clients.
Table 21 Supported Wireless Networks
WIRELESS
NETWORKS
WHERE TO CONFIGURE
Main/1 Network Setting > Wireless >
General screen
Guest/3 Network Setting > Wireless >
Guest/More AP screen
To Next Page
Loading...
