VMG3312-T20A User’s Guide
219
CHAPTER 21
Traffic Status
21.1 Overview
Use the Traffic Status screens to look at network traffic status and statistics of the WAN, LAN interfaces
and NAT.
21.1.1 What You Can Do in this Chapter
• Use the WAN screen to view the WAN traffic statistics (Section 21.2 on page 219).
• Use the LAN screen to view the LAN traffic statistics (Section 21.3 on page 220).
• Use the NAT screen to view the NAT status of the VMG’s client(s) (Section 21.4 on page 221)
21.2 The WAN Status Screen
Click System Monitor > Traffic Status to open the WAN screen. The figure in this screen shows the number
of bytes received and sent on the VMG.
Figure 130 System Monitor > Traffic Status > WAN
The following table describes the fields in this screen.
Table 100 System Monitor > Traffic Status > WAN
LABEL DESCRIPTION
Refresh Interval Select how often you want the VMG to update this screen.
Connected
Interface
This shows the name of the WAN interface that is currently connected.
Packets Sent
To Next Page
Loading...
