ZyXEL Communications VMG3312-T20A - The User Account Add and Edit Screens

Chapter 27 User Account
VMG3312-T20A User’s Guide
232
27.2.1 The User Account Add and Edit Screens
Click Add New Account or the Edit icon of an existing account in the Maintenance > User Account to
open the following screen.
Figure 139 Maintenance > User Account > Add/Edit
The following table describes the labels in this screen.
Table 109 Maintenance > User Account > Add/Edit
LABEL DESCRIPTION
Active This field indicates whether the user account is active or not.
Clear the check box to disable the user account. Select the check box to enable it.
User Name Enter a new name for the account. This field displays the name of an existing account.
Old Password Type the default password or the existing password used to access the VMG web configurator.
Password/New
Password
Type a new password (up to 256 characters) for this account. Note that as you type a password,
the screen displays a (*) for each character you type. After you change the password, use the
new password to access the VMG.
Verify Password/
Verify New
Password
Type the new password again for confirmation.
Retry Times Enter the number of times consecutive wrong passwords can be entered for this account. 0
means there is no limit.
Idle Timeout Enter the length of inactive time before the VMG will automatically log the user out of the web
configurator.
Lock Period Enter the length of time a user must wait before attempting to log in again after a number if
consecutive wrong passwords have been entered as defined in Retry Times.