Chapter 1 Introducing the VMG
VMG3312-T20A User’s Guide
20
Figure 7 VMG3312-T20A Front Panel
1.6.2 LEDs (Lights)
The following graphic displays the labels of the LEDs.
Figure 8 LEDs on the VMG
None of the LEDs are on if the VMG is not receiving power.
Table 1 LED Descriptions
LED COLOR STATUS DESCRIPTION
POWER
Green On The VMG is receiving power and ready for use.
Blinking The VMG is self-testing.
Red On The VMG detected an error while self-testing, or there is a device
malfunction.
Off The VMG is not receiving power.
ETHERNET1~4
Green On The VMG has a successful 10/100 Mbps Ethernet connection with a device
on the Local Area Network (LAN).
Blinking The VMG is sending or receiving data to/from the LAN at 10/100 Mbps.
Off The VMG does not have an Ethernet connection with the LAN.
WLAN
Green On The wireless network is activated.
Blinking The VMG is communicating with wireless clients.
WPS
Orange Blinking The VMG is setting up a WPS connection with a wireless client.
Off The wireless network is not activated.
To Next Page
Loading...
