Chapter 4 Tutorials
VMG3312-T20A User’s Guide
55
3 The screen shows you the list of available media files in the USB storage device. Select the file you want
to open and push the Play button in the remote control.
4.7 Configuring Static Route for Routing to Another
Network
In order to extend your Intranet and control traffic flowing directions, you may connect a router to the
VMG’s LAN. The router may be used to separate two department networks. This tutorial shows how to
configure a static routing rule for two network routings.
In the following figure, router R is connected to the VMG’s LAN. R connects to two networks, N1
(192.168.1.x/24) and N2 (192.168.10.x/24). If you want to send traffic from computer A (in N1 network) to
computer B (in N2 network), the traffic is sent to the VMG’s WAN default gateway by default. In this
case, B will never receive the traffic.
To Next Page
Loading...
