ZyXEL Communications VMG3312-T20A - Page 56

Chapter 4 Tutorials
VMG3312-T20A User’s Guide
56
You need to specify a static routing rule on the VMG to specify R as the router in charge of forwarding
traffic to N2. In this case, the VMG routes traffic from A to R and then R routes the traffic to B.
This tutorial uses the following example IP settings:
Table 7 IP Settings in this Tutorial
DEVICE / COMPUTER IP ADDRESS
The VMG’s WAN 172.16.1.1
The VMG’s LAN 192.168.1.1
IP Type IPv4
Use Interface VDSL
A 192.168.1.34
DSL
DSL