ZyXEL Communications VMG3312-T20A - Page 31

Chapter 2 The Web Configurator
VMG3312-T20A User’s Guide
31
Log System Log Use this screen to view the status of events that occurred to the VMG.
You can export or e-mail the logs.
Security Log Use this screen to view all security related events. You can select level
and category of the security events in their proper drop-down list
window.
Levels include:
•Emergency
•Alert
• Critical
• Error
• Warning
•Notice
• Informational
•Debugging
Categories include:
• Account
• Attack
•Firewall
• MAC Filter
Traffic Status WAN Use this screen to view the status of all network traffic going through the
WAN port of the VMG.
LAN Use this screen to view the status of all network traffic going through the
LAN ports of the VMG.
NAT Use this screen to view NAT statistics for connected hosts.
ARP table ARP table Use this screen to view the ARP table. It displays the IP and MAC address
of each DHCP connection.
Routing Table Routing Table Use this screen to view the routing table on the VMG.
xDSL Statistics xDSL Statistics Use this screen to view the VMG’s xDSL traffic statistics.
Cellular
Statistics
Cellular Statistics Use this screen to look at cellular Internet connection status.
Maintenance
System System
Use this screen to set Device name and Domain name.
User Account User Account Use this screen to change user password on the VMG.
Remote
Management
MGMT Services Use this screen to enable specific traffic directions for network services.
Trust Domain Use this screen to configure a list of public IP addresses which are
allowed to access the VMG.
SNMP SNMP Use this screen to configure SNMP (Simple Network Management
Protocol) settings.
Time Time Use this screen to change your VMG’s time and date.
Email
Notification
Email Notification Use this screen to configure up to two mail servers and sender addresses
on the VMG.
Log Setting Log Setting Use this screen to change your VMG’s log settings.
Firmware
Upgrade
Firmware
Upgrade
Use this screen to upload firmware to your VMG.
Backup Restore Backup/Restore Use this screen to backup and restore your VMG’s configuration
(settings) or reset the factory default settings.
Table 6 Navigation Panel Summary (continued)
LINK TAB FUNCTION