Chapter 4 Tutorials
VMG3312-T20A User’s Guide
50
If the share names include the following special characters: ", ', `, <, >, ^, $, |, &, ;, \, /, :, *, and ?, the
following screen will appear. To avoid this, please correct your share names in the USB, and repeat the
steps above.
3 It’s mandatory for you to add a description for the share. Also, if you want the share to be accessed by
users connecting to the VMG, you can select Public in Access Level or select Security to specific users’
use only. Please note that you need to create the users’ accounts that are eligible to access the secure
shares beforehand under Account Management, if you want to configure the Access Level to Security.
For detailed information, please refer to the steps below. The Add Share Directory screen should look like
the following. Click Apply to finish.
4 This sets up the file sharing server. You can see the USB storage device listed in the table below.
To Next Page
Loading...
