ZyXEL Communications WAH7706 - Resetting the WAH7706 Device; Using the Physical Reset Button

Chapter 1 Introduction
WAH7706 User’s Guide
11
1.7 Resetting the WAH7706
If you forget your password or IP address, or you cannot access the Web Configurator, you will need
to use the physical Reset button to reload the factory-default configuration file. This means that
you will lose all configurations that you had previously saved, the password will be reset to 1234
and the IP address will be reset to 192.168.1.1.
1.7.1 How to Use the Physical Reset Button
1 Make sure the WAH7706 is turned on.
2 Remove the bottom cover and press the Reset button until the WAH7706 reboot and set the
WAH7706 back to its factory-default configurations.
This shows the number of unread text messages in the SMS inbox.
The icon is grayed out if there is no messages.
The WAH7706 is sending and receiving data to/from the WAN.
Table 1 WAH7706 OLED Icons (continued)
ICONS DESCRIPTION