Chapter 6 Router
WAH7706 User’s Guide
52
Figure 26 Router > LAN IP
The following table describes the labels in this screen.
6.3 DHCP Server Screen
The WAH7706 has built-in DHCP server capability that assigns IP addresses to systems that support
DHCP client capability. Use this screen to enable the DHCP server. To access this screen, click
Router > DHCP Server.
Table 22 Router > LAN IP
LABEL DESCRIPTION
Host Name This shows the default host name.
Enter the new host name for the WAH7706 if you want to change it.
IP Address This shows the default LAN IP address.
Enter the new IP address for the WAH7706’s LAN interface if you want to change it.
Subnet Mask This shows the default subnet mask.
Enter the subnet mask of this interface in dot decimal notation. The subnet mask
indicates what part of the IP address is the same for all computers in the network.
Apply Click Apply to save your changes back to the WAH7706.
Reset Click Reset to reload the previous configuration for this screen.
To Next Page
Loading...
