Chapter 4 Internet
WAH7706 User’s Guide
26
4.3 PIN Settings Screen
Use this screen to turn on or turn off PIN code authentication on the inserted SIM card. Click
Internet > PIN Settings. The screen appears as shown next.
Figure 12 Internet > PIN Settings
Allow Data
Roaming
Select this check box to enable data roaming on the WAH7706.
4G roaming is to use your mobile device in an area which is not covered by your service
provider. Enable roaming to ensure that your WAH7706 is kept connected to the Internet
when you are travelling outside the geographical coverage area of the network to which you
are registered.
Cellular
Network Mode
Select the type of the network (4G Mode, 3G Mode, or 2G Mode) to which you want the
WAH7706 to connect and click Apply to save your settings.
Otherwise, select Auto to have the WAH7706 connect to an available network using the
default settings on the SIM card. If the currently registered mobile network is not available
or the mobile network’s signal strength is too low, the WAH7706 switches to another
available mobile network.
Internet
Connection
Method
Select Always to connect to the mobile network automatically if there is an available mobile
network. Otherwise, select Manual.
Apply Click Apply to save your changes back to the WAH7706.
Reset Click Reset to reload the previous configuration for this screen.
Table 11 Internet > Internet Status (continued)
LABEL DESCRIPTION
To Next Page
Loading...
