ZyXEL Communications WAH7706 - URL Filter for Website Access Control

Chapter 6 Router
WAH7706 User’s Guide
57
6.8 URL Filter Screen
Use this screen to block the users on your network from accessing certain web sites. To access this
screen, click Router > Firewall > URL Filter.
Figure 32 Router > Firewall > URL Filter
Port This field displays a single port number of the source or the starting port number of a range.
Enter the port number/range of the source that define the traffic type, for example TCP port
80 defines web traffic.
Protocol This field displays the protocol (TCP, UDP, TCP+UDP or any) used to transport the packets
for which you want to apply the rule.
Dest. IP This field displays the destination IP addresses to which this rule applies.
Port This field displays a single port number of the destination or the starting port number of a
range.
Enter the port number/range of the destination that define the traffic type, for example TCP
port 80 defines web traffic.
Comment Enter descriptions of the rule in this field.
Action Click Edit to go to the screen where you can edit the filtering rule.
Click Delete to remove the filtering rule.
Apply Click this button to save your changes back to the WAH7706.
Reset Click Reset to reload the previous configuration for this screen.
Table 27 Router > Firewall > IPv6/Port Filter
LABEL DESCRIPTION