Chapter 8 System
WAH7706 User’s Guide
72
To access this screen, click System > Firmware Upgrade. This screen displays the current
firmware version and status of the WAH7706. Type in the location of the file you want to upload in
the Select Firmware File field or click Choose File to find it. Remember that you must
decompress compressed (.ZIP) files before you can upload them. You can select the check box to
return the WAH7706 to its factory defaults after upgrading the new firmware. Click Apply to begin
the upload process.
The upload process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After
a successful upload, the system will reboot.
Do NOT turn off the WAH7706 while firmware upload is in progress!
Figure 46 System > Firmware Upgrade
8.6 Time Settings Screen
For effective scheduling and logging, the WAH7706 system time must be accurate. The WAH7706
has a software mechanism to get the current time and date from an external server. To change your
WAH7706’s time zone, click System > Time Settings. The screen displays as shown. You can
have the WAH7706 get the date and time from a time server or change the IP address or URL of
your time server.
To Next Page
Loading...
