Chapter 5 Wi-Fi
WAH7706 User’s Guide
34
Figure 16 Wi-Fi > Wi-Fi Status
The following table describes the labels in this screen.
5.3 Wi-Fi Settings Screen
Use this screen to enable the wireless LAN, enter the SSID and select the wireless security mode.
Note: If you are configuring the WAH7706 from a computer connected to the wireless
LAN and you change the WAH7706’s SSID, channel or security settings, you will
lose your wireless connection when you press Apply to confirm. You must then
change the wireless settings of your computer to match the WAH7706’s new
settings.
To access this screen, click Wi-Fi > Wi-Fi Settings.
Table 16 Wi-Fi > Wi-Fi Status
LABEL DESCRIPTION
Wi-Fi Status
SSID 1/ SSID2 The SSID (Service Set IDentity) identifies the service set with which a wireless device is
associated. Wireless devices associating to the access point (AP) must have the same
SSID.
This displays the basic wireless settings of SSID 1 and SSID 2.
SSID 1/ SSID2 This displays a descriptive name used to identify the WAH7706 in the 2.4GHz/5GHz
wireless LAN.
Encryption This field displays the level of wireless security the WAH7706 is using.
MAC Address This field displays the 2.4GHz/5GHz wireless adapter MAC Address of your device.
Channel This field displays the channel number which you select manually.
To Next Page
Loading...
