Chapter 8 System
WAH7706 User’s Guide
75
Figure 49 System > System Log
he following table describes the labels in this screen.
Table 43 System > System Log
LABEL DESCRIPTION
System Log Setting
Enable Log Select the check box to enable system logging.
Log Level Select the level of the logs that the WAH7706 is to record and send to the syslog server.
The WAH7706 displays and records the logs with the level equal to or higher than what
you selected.
Enable Remote Log Select the check box to enable syslog logging.
Syslog logging sends a log to an external log server.
Remote Log Host Enter the server name or IP address of the syslog server that will log the selected log
level of logs.
Remote Log Port Enter the port number of the syslog server.
Apply Click Apply to save your changes back to the WAH7706.
To Next Page
Loading...
