ZyXEL Communications WRE6505 v2 - Page 59

Chapter 9 Wireless LAN
WRE6505 v2 User’s Guide
59
Choose AP network manually
Use this screen to manually enter the SSID, security mode and Wi-Fi key of the AP to which you
want the WRE6505 v2 to connect. This is useful when the AP’s SSID is hidden. Click Continue to
configure the wireless settings between the WRE6505 v2 and its wireless clients (see Set up the
WRE6505 v2’s WLAN for clients on page 58).
Complete the AP and WLAN setup
This screen displays when you have successfully set up your WRE6505 v2 to connect to an AP.
Verify the WRE6505 v2’s wireless network settings and click GO to open the Status screen.