Chapter 3 Universal Repeater Mode
WRE6505 User’s Guide
16
Figure 7 Status: Universal Repeater Mode
The following table describes the labels shown in the Status screen.
Table 3 Status Screen: Universal Repeater Mode
LABEL DESCRIPTION
Logout Click this at any time to exit the Web Configurator.
Device Information
Model Number This is the WRE6505’s model name.
Firmware Version This is the firmware version and the date created.
Sys OP Mode This is the device mode (Section 2.1.1 on page 12) to which the WRE6505 is set - Universal
Repeater Mode.
LAN Information
MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
IP Address This shows the LAN port’s IP address.
IP Subnet Mask This shows the LAN port’s subnet mask.
DHCP This shows the LAN port’s DHCP role - Client or None.
2.4G WLAN Information
MAC Address This shows the wireless adapter MAC Address of your WRE6505.
Status This shows the current status of the Wireless LAN - ON.
SSID This shows a descriptive name used to identify the WRE6505 in the wireless LAN.
Channel This shows the channel number which you select manually or the WRE6505 automatically
scans and selects.
Security This shows the level of wireless security the WRE6505 is using.
To AP Connection This displays whether the WRE6505 is connected to an AP or not.
To AP Security This displays the type of established security protocol with the AP.
To AP SSID This displays the SSID of the connected AP.
To AP Channel This displays the current channel in use with the connected AP.
To Next Page
Loading...
