Chapter 3 Universal Repeater Mode
WRE6505 User’s Guide
18
3.5 WPS Screen
Use this screen to connect to another AP. Go to Configuration > Wireless LAN (2.4G/5G) >
WPS to open the following screen.
Note: Wireless clients cannot use WPS to set up a wireless network with the WRE6505 in
universal repeater mode.
Figure 8 Universal Repeater: Configuration > Wireless LAN (2.4G/5G) > WPS
Figure 9 AP: Configuration > Wireless LAN (2.4G/5G) > WPS
The following table describes the labels in this screen.
Table 4 Universal Repeater: Configuration> Wireless LAN (2.4G / 5G) > WPS
LABEL DESCRIPTION
WPS Setup
WPS Select this to enable the WPS feature.
To Next Page
Loading...
