ZyXEL Communications WRE6505 - Selecting an AP by Manually Entering Security Information

Chapter 8 Tutorials
WRE6505 User’s Guide
50
8.4.2 Selecting an AP by Manually Entering Security Information
This example shows you how to configure wireless security settings with the following parameters
on your WRE6505.
Follow the steps below to create a secure wireless network by manually entering the AP’s wireless
security settings in the WRE6505’s interface.
The instructions require that your hardware is connected (see the Quick Start Guide) and you are
logged into the Web Configurator through your LAN connection (see Section 5.2 on page 26).
1 Select Setup repeater manually.
2 Type the SSID of the AP into the SSID field and click Next.
Figure 41 Tutorial: Typing an SSID
3 Select the security settings and click Next.
SSID ExampleSSID
Channel 7
Security WPA2 PSK