Chapter 4 Access Point Mode
WRE6505 User’s Guide
24
4.4.1 Navigation Panel
Use the menu in the navigation panel to configure WRE6505 features in Access Point mode.
The following screen and table show the features you can configure in Access Point mode.
Figure 12 Menu: Access Point Mode
The following table describes the sub-menus.
Association List 5G
# This is the index number of an associated wireless client.
MAC Address This field displays the MAC address of an associated wireless client.
Association Time This field displays the time a wireless station first associated with the WRE6505’s WLAN
network.
Signal This is the signal strength number of the associated client.
Table 6 Status Screen: Access Point Mode (continued)
LABEL DESCRIPTION
Table 7 Navigation Panel: Access Point Mode
LINK TAB FUNCTION
Status This screen shows the WRE6505’s general device, system and interface
status information. Use this screen to access the wizard, and summary
statistics tables.
CONFIGURATION
Network
Wireless LAN
2.4G
General Use this screen to configure general wireless LAN settings.
Security Use this screen to configure wireless security settings.
MAC Filter Use the MAC filter screen to configure the WRE6505 to block access to
devices or block the devices from accessing the WRE6505.
Advanced This screen allows you to configure advanced wireless settings.
WPS Use this screen to configure WPS.
WPS Station Use this screen to add a wireless station using WPS. Only available in AP
mode.
Scheduling Use this screen to schedule the times the Wireless LAN is enabled.
To Next Page
Loading...
