WRE6505 User’s Guide
75
CHAPTER 12
Troubleshooting
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
• Power, Hardware Connections, and LEDs
• WRE6505 Access and Login
• Internet Access
• Resetting the WRE6505 to Its Factory Defaults
• Wireless Problems
12.1 Power, Hardware Connections, and LEDs
The WRE6505 does not turn on. None of the LEDs turn on.
1 Make sure the WRE6505 is plugged in to an appropriate power source. Make sure the power source
is turned on.
2 Disconnect and re-connect the power adaptor or cord to the WRE6505.
3 If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
1 Make sure you understand the normal behavior of the LED. See Section 1.3 on page 9.
2 Make sure you understand how the LEDs are enabled or disabled. See Section 1.3 on page 9.
3 Check the hardware connections. See the Quick Start Guide.
4 Inspect your cables for damage. Contact the vendor to replace any damaged cables.
5 Disconnect and re-connect the power adaptor to the WRE6505.
6 If the problem continues, contact the vendor.
To Next Page
Loading...
