Chapter 11 Maintenance
WRE6505 User’s Guide
70
Figure 62 Maintenance > System Mode
The following table describes the labels in this menu.
11.8.1 System WPS Behavior
In Universal Repeater mode (see Chapter 2 on page 13), you can select the type of WPS behavior:
Normal Mode, Range Boost, or Speed Boost mode.
The device enables you to extend the range of your dual-band router to eliminate "dead spots" in
your wireless network. You can choose from normal mode, range boost, or speed boost modes for
both your 2.4GHz and 5GHz networks.
The following terms are used to describe the WPS behavior:
• Up: The connection from the WRE6505 to the Router
• Down: The connection from the WRE6505 to a client
Table 35 Maintenance > System Mode
LABEL DESCRIPTION
Normal mode The default WPS behavior, both 2.4 GHz and 5 GHz bands are supported in up and down
broadcasting.
Range boost
mode
Select to set the device to Range Boost mode--the 2.4 GHz band is supported on the Down
behavior, while the 5 GHz band is supported on the Up behavior.
Speed boost
mode
Select to set the device to Range Boost mode--the 5 GHz band is supported on the Down
behavior, while the 2.4 GHz band is supported on the Up behavior.
Apply Click Apply to save your changes back to the WRE6505.
Cancel Click Cancel to reload the previous configuration for this screen.
To Next Page
Loading...
