ZyXEL Communications WRE6505 - LAN IP Address Configuration; Configuring the LAN IP Address Screen

WRE6505 User’s Guide
63
CHAPTER 10
LAN
10.1 Overview
This screen allows you to assign the WRE6505 a fixed or dynamic management IP address. The
default IP address of the WRE6505 in repeater mode is 192.168.1.2, while the default IP address of
the WRE6505 in AP mode is 169.254.168.254. Alternatively, you can connect to the WRE6505 using
the default domain name, http://zyxelsetup.
10.2 LAN IP Screen
Use this screen to change the WRE6505’s management IP address. Click Network > LAN.
Figure 52 Network > LAN > IP
The following table describes the labels in this screen.
Table 29 Network > LAN > IP
LABEL DESCRIPTION
Get from DHCP
Server
Select this to have the WRE6505 get a dynamic IP address from a DHCP server.
User Defined LAN
IP
Click this to enable the manual IP configuration.
IP Address Enter the IP address of your WRE6505 in dotted decimal notation.
IP Subnet Mask Enter the subnet mask of your WRE6505 in dotted decimal notation.
IP Gateway Enter the gateway of your WRE6505 in dotted decimal notation.
Apply Click Apply to save your changes back to the WRE6505.
Cancel Click Cancel to reload the previous configuration for this screen.