Chapter 8 Tutorials
WRE6505 User’s Guide
46
Figure 34 Example WPS Process: PBC Method
8.3.2 PIN Configuration
When you use the PIN configuration method, you need to use both WRE6505’s configuration
interface and the client’s utilities.
The push button configuration function is only available in AP mode.
1 Launch your wireless client’s configuration utility. Go to the WPS Station settings and select the PIN
method to get a PIN number.
2 On the WRE6505, navigate to the Network > Wireless LAN (2.4G/5G) > WPS screen.
3 Obtain the PIN number for the WRE6505 or press the Generate button to create a new PIN
number. See Section 9.9 on page 59
4 Enter the WRE6505 PIN number in the wireless station’s utility screen.
The WRE6505 authenticates the wireless client and sends the proper configuration settings to the
wireless client. This may take up to two minutes. Then the wireless client is able to communicate
with the WRE6505 securely.
Wireless Client
SECURITY INFO
COMMUNICATION
WITHIN 2 MINUTES
AP
To Next Page
Loading...
