Chapter 5 The Web Configurator
WRE6505 User’s Guide
29
5.3 Resetting the WRE6505
If you forget your password or IP address, or you cannot access the Web Configurator, press the
WPS button for more than 5 seconds (no longer than 10 seconds) to reload the factory-default
configuration file. This means that you will lose all configurations that you had previously saved, the
password will be reset to 1234.
1 Make sure the power LED is on.
2 Press and hold the WPS button. After 5 (no longer than 10) seconds, the power LED begins
flashing.
3 Release the WPS button. The WRE6505 reloads factory defaults and begins to reboot.
To Next Page
Loading...
