Chapter 3 Universal Repeater Mode
WRE6505 User’s Guide
19
PIN Number This displays a PIN number last time system generated. Click Generate to generate a new
PIN number.
Generate Click Generate to have the WRE6505 generate a PIN number.
WPS Status
Status This displays Configured when the WRE6505 has connected to a wireless network using
WPS or when Enable WPS is selected and wireless or wireless security settings have been
changed. The current wireless and wireless security settings also appear in the screen.
This displays Unconfigured if WPS is disabled and there are no wireless or wireless
security changes on the WRE6505 or you click Release Configuration to remove the
configured wireless and wireless security settings.
Release
Configuration
(AP Mode Only)
This button is only available in AP mode when the WPS status displays Configured.
Click this button to remove all configured wireless and wireless security settings for WPS
connections on the WRE6505.
802.11 Mode Displays the wireless protocol configured for the WPS connection.
SSID Displays the network name for the WPS connection.
Security Displays the security protocol selected for the WPS connection.
Apply Click Apply to save your changes back to the WRE6505.
Cancel Click Cancel to return to the previous menu without saving.
Table 4 Universal Repeater: Configuration> Wireless LAN (2.4G / 5G) > WPS (continued)
LABEL DESCRIPTION
To Next Page
Loading...
