Chapter 4 Access Point Mode
WRE6505 User’s Guide
22
Figure 11 Status Screen: Access Point Mode
The following table describes the icons shown in the Status screen.
The following table describes the labels shown in the Status screen.
Table 5 Status Screen Icon Key: Access Point Mode
ICON DESCRIPTION
Click this icon to view copyright and a link for related product information.
Click this icon to open the wizard. See Chapter 6 on page 30.
Select a number of seconds or None from the drop-down list box to refresh all screen statistics
automatically at the end of every time interval or to not refresh the screen statistics.
Click this button to refresh the status screen statistics.
Click this icon to see the Status page. The information in this screen depends on the device
mode you select.
Click this icon to see the Configuration navigation menu.
Click this icon to see the Maintenance navigation menu.
Table 6 Status Screen: Access Point Mode
LABEL DESCRIPTION
Logout Click this at any time to exit the Web Configurator.
Device Information
Model Number This is the WRE6505’s model name.
Firmware Version This is the firmware version and the date created.
Sys OP Mode This is the device mode (Section 2.1.1 on page 12) to which the WRE6505 is set - Access
Point Mode.
LAN Information
MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
IP Address This shows the LAN port’s IP address.
To Next Page
Loading...
