Chapter 14 Interface Grouping
XMG3512-B10A User’s Guide
174
Figure 100 Interface Group Configuration
The following table describes the fields in this screen.
Table 74 Interface Group Configuration
LABEL DESCRIPTION
Group Name Enter a name to identify this group. You can enter up to 30 characters. You can use letters,
numbers, hyphens (-) and underscores (_). Spaces are not allowed.
WAN Interfaces
used in the
grouping
Select the WAN interface this group uses. The group can have up to one PTM interface, up to
one ATM interface, up to one ETH interface, and and up to one WWAN interface.
Select None to not add a WAN interface to this group.
Grouped LAN
Interfaces
Available LAN
Interfaces
Select one or more LAN interfaces (Ethernet LAN, HPNA or wireless LAN) on the Available LAN
Interfaces list and use the left arrow to move them to the interface list on the left to add the
interfaces to this group.
To remove a LAN or wireless LAN interface from the interface list on the left, use the right-facing
arrow.
To Next Page
Loading...
