XMG3512-B10A User’s Guide
34
CHAPTER 4
Tutorials
4.1 Overview
This chapter shows you how to use the XMG’s various features.
• Setting Up an ADSL PPPoE Connection, see page 34
• Setting Up a Secure Wireless Network, see page 37
• Setting Up Multiple Wireless Groups, see page 43
• Configuring Static Route for Routing to Another Network, see page 46
• Configuring QoS Queue and Class Setup, see page 48
• Access the XMG Using DDNS, see page 52
• Configuring the MAC Address Filter, see page 53
• Access Your Shared Files From a Computer, see page 54
4.2 Setting Up an ADSL PPPoE Connection
This tutorial shows you how to set up an ADSL Internet connection using the Web Configurator.
If you connect to the Internet through an ADSL connection, use the information from your Internet
Service Provider (ISP) to configure the XMG. Be sure to contact your service provider for any information
you need to configure the Broadband screens.
1 Click Network Setting > Broadband to open the following screen. Click Add New WAN Interface.
2 In this example, the DSL connection has the following information.
General
Name MyDSLConnection
Type ADSL over ATM
Connection Mode Routing
Encapsulation PPPoE
To Next Page
Loading...
