ZyXEL Communications XMG3512-B10A - Setting up a Secure Wireless Network; Configuring the Wireless Network Settings

Chapter 4 Tutorials
XMG3512-B10A User’s Guide
37
4.3 Setting Up a Secure Wireless Network
Thomas wants to set up a wireless network so that he can use his notebook to access the Internet. In this
wireless network, the XMG serves as an access point (AP), and the notebook is the wireless client. The
wireless client can access the Internet through the AP.
Thomas has to configure the wireless network settings on the XMG. Then he can set up a wireless
network using WPS (Section 4.3.2 on page 39) or manual configuration (Section 4.3.3 on page 42).
4.3.1 Configuring the Wireless Network Settings
This example uses the following parameters to set up a wireless network.
1 Click Network Setting > Wireless to open the General screen. Select More Secure as the security level
and WPA2-PSK as the security mode. Configure the screen using the provided parameters (see
page 37). Click Apply.
SSID Example
Security Mode WPA2-PSK
Pre-Shared Key DoNotStealMyWirelessNetwork
802.11 Mode 802.11b/g/n Mixed