Chapter 6 Broadband
XMG3512-B10A User’s Guide
67
6.2.1.1 Routing Mode
Use Routing mode if your ISP give you one IP address only and you want multiple computers to share an
Internet account.
The following example screen displays when you select the ADSL/VDSL over ATM connection type,
Routing mode, and IPoE encapsulation. The screen varies when you select other interface type,
encapsulation, and IPv4/IPv6 mode.
Figure 24 Network Setting > Broadband > Add New WAN Interface/Edit (Routing Mode)
The following table describes the labels in this screen.
Table 9 Network Setting > Broadband > Add New WAN Interface/Edit (Routing Mode)
LABEL DESCRIPTION
General
Name Specify a descriptive name for this connection.
To Next Page
Loading...
