Chapter 36 Diagnostic
XMG3512-B10A User’s Guide
239
36.3 Ping & TraceRoute & NsLookup
Use this screen to ping, traceroute, or nslookup an IP address. Click Maintenance > Diagnostic >
Ping&TraceRoute&NsLookup to open the screen shown next.
Figure 160 Maintenance > Diagnostic > Ping & Traceroute & Nslookup
The following table describes the fields in this screen.
36.4 802.1ag
Click Maintenance > Diagnostic > 802.1ag to open the following screen. Use this screen to perform CFM
actions.
Table 122 Maintenance > Diagnostic > Ping & TraceRoute & NsLookup
LABEL DESCRIPTION
URL or IP
Address
Type the IP address of a computer that you want to perform ping, traceroute, or nslookup in
order to test a connection.
Ping Click this to ping the IP address that you entered.
TraceRoute Click this button to perform the traceroute function. This determines the path a packet takes to
the specified computer.
Nslookup Click this button to perform a DNS lookup on the IP address of a computer you enter.
To Next Page
Loading...
