ZyXEL Communications XMG3512-B10A - The Ethernet WAN Screen

Chapter 6 Broadband
XMG3512-B10A User’s Guide
76
6.4 The Ethernet WAN Screen
You can enable the fourth Ethernet LAN port to be an Ethernet WAN port in the Ethernet WAN screen.
Click Network Setting > Broadband > Ethernet WAN to display the following screen.
Figure 28 Network Setting > Broadband > Ethernet WAN
The following table describes the labels in this screen.
8a, 8b, 8c, 8d,
12a, 12b, 17a,
30a, US0
The G.993.2 VDSL standard defines a wide range of profiles that can be used in different VDSL
deployment settings, such as in a central office, a street cabinet or a building.
The XMG must comply with at least one profile specified in G.993.2. but compliance with more
than one profile is allowed.
Apply Click Apply to save your changes back to the XMG.
Cancel Click Cancel to return to the previous configuration.
Table 13 Network Setting > Broadband > Advanced (continued)
LABEL DESCRIPTION
Table 14 Network Setting > Broadband > Ethernet WAN
LABEL DESCRIPTION
Active Select Enable to convert the fourth Ethernet LAN port to the Ethernet WAN port. Otherwise,
select Disable.
Apply Click Apply to save your changes back to the XMG.
Cancel Click Cancel to return to the previous configuration.