Chapter 37 Troubleshooting
XMG3512-B10A User’s Guide
248
37.5 USB Device Connection
The XMG fails to detect my USB device.
1 Disconnect the USB device.
2 Reboot the XMG.
3 If you are connecting a USB hard drive that comes with an external power supply, make sure it is
connected to an appropriate power source that is on.
4 Re-connect your USB device to the XMG.
37.6 UPnP
When using UPnP and the XMG reboots, my computer cannot detect UPnP and refresh My
Network Places > Local Network.
1 Disconnect the Ethernet cable from the XMG’s LAN port or from your computer.
2 Re-connect the Ethernet cable.
The Local Area Connection icon for UPnP disappears in the screen.
Restart your computer.
To Next Page
Loading...
