ZyXEL Communications XMG3512-B10A - Page 220

Chapter 28 User Account
XMG3512-B10A User’s Guide
220
Figure 140 Maintenance > User Account > Add/Edit
The following table describes the labels in this screen.
Table 111 Maintenance > User Account > Add/Edit
LABEL DESCRIPTION
User Name Enter a new name for the account. This field displays the name of an existing account.
Old Password Type the default password or the existing password used to access the XMG web configurator.
Password/New
Password
Type your new system password (up to 256 characters). Note that as you type a password, the
screen displays a (*) for each character you type. After you change the password, use the new
password to access the XMG.
Verify Password/
Verify New
Password
Type the new password again for confirmation.
Retry Times Enter the number of times consecutive wrong passwords can be entered for this account. 0
means there is no limit.
Idle Timeout Enter the length of inactive time before the XMG will automatically log the user out of the web
configurator.
Lock Period Enter the length of time a user must wait before attempting to log in again after a number if
consecutive wrong passwords have been entered as defined in Retry Times.
Group Specify whether this user will have Administrator or User privleges.
OK Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving.