Chapter 4 Tutorials
XMG3512-B10A User’s Guide
40
The XMG sends the proper configuration settings to the wireless client. This may take up to two minutes.
The wireless client is then able to communicate with the XMG securely.
The following figure shows you an example of how to set up a wireless network and its security by
pressing a button on both XMG and wireless client.
Example WPS Process: PBC MethodZyxel
PIN Configuration
When you use the PIN configuration method, you need to use both the XMG’s web configurator and
the wireless client’s utility.
1 Launch your wireless client’s configuration utility. Go to the WPS settings and select the PIN method to
get a PIN number.
2 Log into XMG’s web configurator and go to the Network Setting > Wireless > WPS screen. Enable the
WPS function and click Apply.
Wireless Client
VMG
SECURITY INFO
COMMUNICATION
WITHIN 2 MINUTES
Press and hold for
5 seconds
WLAN/
WPS
To Next Page
Loading...
