ZyXEL Communications XMG3512-B10A - Page 61

Chapter 5 Network Map and Status Screens
XMG3512-B10A User’s Guide
61
NAT Session
Usage
This field displays what percentage of the XMG supported NAT sessions are currently being
used. This field also displays the number of active NAT sessions and the maximum number of
NAT sessions the XMG can support.
Interface Status
Interface This column displays each interface the XMG has.
Status This field indicates the interface’s use status.
For the LAN and Ethernet WAN interfaces, this field displays Up when using the interface and
NoLink when not using the interface.
For a WLAN interface, this field displays the enabled (Up) or disabled (Disable) state of the
interface.
For the DSL interface, this field displays Down (line down), Up (line up or connected), Drop
(dropping a call) if you're using PPPoE encapsulation, and NoLink when not using the
interface.
Rate For the Ethernet WAN and LAN interfaces, this displays the port speed and duplex setting.
For the DSL interface, it displays the downstream and upstream transmission rate.
For the WLAN interface, it displays the maximum transmission rate or N/A with WLAN
disabled.
Table 6 Status Screen (continued)
LABEL DESCRIPTION