2gig Technologies EDGE Quick Start Guide

23
Copyright © 2021 Nortek Security & Control LLC
Change the Master User or Duress Code
The Master User Code provides users with the ability to access the System Settings menu and, depending on the system conguration, provide access to other
pin-protected features. The Duress code lets users send a silent duress report to the Central Station. See Using the Duress Code on page 18.
IMPORTANT: When customizing codes for the system, it's best not use the dwelling’s physical address, telephone digits, birth dates or
birth years. Codes should only be given to trusted individuals.
Tap System Settings (
) from the Main screen, enter the system’s Master User Code, and then tap the Users ( ) icon. Next, continue with these steps:
At the Users screen, tap the pencil icon (
)
next to Master User or Duress.
At the Edit Master User or Edit Duress User
screen, tap the pencil icon (
) in the Access
Code section.
At the Enter a Code for the User screen,
input a unique code and tap Next. Then,
conrm the code and tap Done.

2gig Technologies EDGE Specifications

General

Brand	2gig Technologies
Model	EDGE
Category	Security System
Language	English