2N IP series - Page 114

Configuration manual for 2N IP intercoms
114 / 282
•
•
•
•
•
•
•
•
•
Video Stream Enabled – enable offering of video stream while establishing connection
with the RTSP server. If video streaming is disabled, video will not be transmitted via the
fixed streaming profiles or local stream URL.
Zipstream – select the default level of the Zipstream compression (for H.264). AXIS
Zipstream preserves all the important forensic detail you need while lowering bandwidth
and storage requirements by an average of 50 %. Zipstream compression is only available
for Artpec-7 equipped devices.
Local stream URL– last generated and (applied) URL of the stream for the RTSP client.
Click the pencil icon to edit and generate the local stream URL.
Video codec– select a codec from the available video codec list.
Video Resolution– select an image resolution value.
Video Framerate– set a framerate value (1 to 30 fps, MJPEG video codec limit is 15
fps).
Bitrate– select one of the available bitrates.
Audio– enable audio transmission.
Zipstream(available for H.264 only) – set the local stream URL zipstream to be
preferred to the value given in the Streaming Settings.
The RTSP count is limited to 4 parallel streams. This count includes both audio streams without
video and audio return channel directed to the intercom.