106 CHAPTER 8: CONFIGURING VLANS
■ Select port to add to the VLAN — Adds a selected port to the
VLAN.
■ Select Membership Type — Displays the membership type for each
VLAN. The possible field values are:
■ Untagged — Indicates the interface is an untagged member of the
VLAN.
■ Tagged — Indicates the interface is a tagged member of a VLAN.
VLAN tagged packets are forwarded by the interface. The packets
contain VLAN information.
■ Not a Member — Indicates the interface is not a member of the
VLAN.
■ Not Available for Selection — Indicates the interface is not
available for selection.
■ Select All — Allows the user to select all ports to be added to the
VLAN.
■ Select None — Removes the ports selected.
To re nam e VL ANs :
1 Select a VLAN from the list to be renamed.
2 Click Rename. The VLANs are renamed, and the device is updated.
To add ports to a VLAN
1 Select a VLAN to modify.
2 Select the membership type for the selected port.
3 Select ports to be added to the selected VLAN.
4 Click Apply. The selected ports are added to the VLAN, and the device is
updated.
To Next Page
Loading...
