96 CHAPTER 7: AGGREGATING PORTS
Summary
■ Group ID — Displays the Link Aggregated Group ID.
■ Type — Displays the link aggregation type.
■ Member Ports — Displays the ports configured to the LAG.
2 Define the fields.
3 Click Apply. Link Aggregation is configured, and the application is
updated.
Removing Link
Aggregation
The Link Aggregation Remove Page allows the network manager to
remove group IDs containing member ports.
Monitor users have no access to this page.
To remove Link Aggregation:
1 Click Ports > Link Aggregation > Remove. The Link Aggregation
Remove Page opens:
Figure 49 Link Aggregation Remove Page
To Next Page
Loading...
