Configuring Logging 169
Configuring
Logging
The Logging Setup Page contains fields for defining which events are
recorded to which logs. It contains fields for enabling logs globally, and
parameters for defining logs. Log messages are listed from the highest
severity to the lowest severity level.
The monitor users have no access to this page.
To define Log Parameters:
1 Click Administration > Logging > Setup. The Logging Setup Page
opens:
Figure 96 Logging Setup Page
The Logging Setup Page contains the following fields:
■ Enable Local Logging — Indicates if device local logs for Cache and
servers are enabled. Console logs are enabled by default. The possible
field values are:
■ Checked — Enables device logs.
■ Unchecked — Disables device logs.
To Next Page
Loading...
