Configuring Port Mirroring 177
■ Select port — Selects the port for mirroring or monitoring. A port
unavailable for mirroring is colored grey.
■ Summary — Displays the current monitor and mirror ports. The fields
displayed are:
■ Monitor — Displays the monitor port.
■ Mirror In — Displays ports that are monitored on the RX.
■ Mirror Out — Displays ports that are monitored on the TX.
2 Select a port type.
3 If the Mirrored port type is selected, select Mirror In and/or Mirror Out.
4 Select the ports to be monitored.
5 Click Apply. Port mirroring is enabled, and the device is updated.
Removing Port
Mirroring
The Port Mirroring Remove Page permits the network manager to
terminate port mirroring or monitoring.
The monitor users have no access to this page.
1 Click Monitoring > Port Mirroring > Remove. The Port Mirroring
Remove Page opens:
Figure 99 Port Mirroring Remove Page
To Next Page
Loading...
