84 CHAPTER 5: GENERAL SYSTEM INFORMATION
■ DST Region — Selects USA or European standard DST, or
customizable DST.
■ USA — The device switches to DST at 2:00 a.m. from the second
Sunday in March, and reverts to standard time at 2:00 a.m. on the
First Sunday of November
■ European — The device switches to DST at 1:00 am on the last
Sunday in March and reverts to standard time at 1:00 am on the
last Sunday in October. The European option applies to EU
members, and other European countries using the EU standard.
■ Other — The DST definitions are user-defined and can be
customized to your location. If Other is selected, the From and To
fields must be defined.
■ Time Set Offset — Sets the amount of time adjusted for DST (in
minutes). The default time is 60 minutes.
■ From — Indicates the non-recurring time that DST begins when the
region is set to Other. Enter the Hours, Minutes, Month, day, and Year
for DST to begin.
■ To — Indicates the non-recurring time that DST ends when the region
is set to Other. Enter the Hours, Minutes, Month, day, and Year for
DST to end.
■ Recurring — When the region is set to Other, this check box enables
user-defined DST that is constant from year to year.
■ Recurring From — The recurring time that DST begins each year.
Select or type the Day, Week, Month, and Time.
■ Recurring To — The recurring time that DST ends each year. Select or
type the Day, Week, Month, and Tim.:
2 Define the local Time and Date.
3 Enable or disable automatic DST by clicking the Daylight Savings box.
4 Configure the region, Time Set Offset, Recurring, From and To fields as
appropriate for your location.
5 Click Apply. The DST settings are saved, and the device is updated.
6 Be sure to save your configuration, or you changes will be lost when the
switch is rebooted. To save the configuration, refer to “Saving the
Configuration” on page 37.
To Next Page
Loading...
