1-7
To do… Use the command… Remarks
Configure the test type
test-type ftp
Required
By default, the test type is ICMP.
Configure the number
of probes per test
count times
Optional
By default, each test makes one probe.
Configure the
maximum number of
history records that can
be saved
history-records number
Optional
By default, the maximum number is 50.
Configure the
automatic test interval
frequency interval
Optional
By default, the automatic test interval is
zero seconds, indicating no automatic
test will be made.
Configure the probe
timeout time
timeout time
Optional
By default, a probe times out in three
seconds.
Configure the type of
service
tos value
Optional
By default, the service type is zero.
Configure the type of
FTP operation
ftp-operation { get | put }
Optional
By default, the type of FTP operation is
get, that is, the FTP operation will get a
file from the FTP server.
Configure an FTP login
username
username name
Configure an FTP login
password
password password
Required
By default, neither username nor
password is configured.
Configure a file name
for the FTP operation
filename file-name
Required
By default, no file name is configured for
the FTP operation
Start the test
test-enable
Required
Display test results
display remote-ping results
[ admin-name operation-tag ]
Required
You can execute the command in any
view.
4) Configuring HTTP test on remote-ping client
Follow these steps to configure HTTP test on remote-ping client:
To do… Use the command… Remarks
Enter system view
system-view
—
Enable the remote-ping
client function
remote-ping-agent enable
Required
By default, the remote-ping client
function is disabled.
Create a remote-ping
test group and enter its
view
remote-ping
administrator-name
operation-tag
Required
By default, no test group is configured.
To Next Page
Loading...
