3Com CoreBuilder 2500 - Page 42

2-10 CHAPTER 2: VLANS ON THE COREBUILDER 2500 SYSTEM
In Figure 2-2, two overlapping protocol-sensitive VLANs (IP and IPX) are
connected to servers on separate, high-speed 100BASE-T ports. The
client end stations share the same switch ports, yet the IP traffic and IPX
traffic remain separate.
.
Figure 2-2 Overlapping VLAN Configuration with Servers on Separate Ports
IP Server
VLAN #1, #2, and #3
Power Run
Process Power
Fan Temp
Config Inserted
ERROR PCMCIA
Modem Ter minal
Fast Ethernet
100 BASE-T
R
CoreBuilder
™
2500
IP Server
VLAN #1
IPX Server
VLAN #2
IPX
IPX
IPX
IP IP
IP
= VLAN 1 (IP)
= VLAN 2 (IPX)
= VLAN 1 (IP) + VLAN 2 (IPX)