Network Camera User’s Guide
39/96
IP address, Subnet mask, and Gateway (read only):
Shows the IP information got from PPPoE server site.
Status:
Shows the Status of PPPoE connection.
Streaming
RTSP is a streaming control protocol, and a starting point for negotiating transports such
as RTP, multicast and Unicast, and for negotiating codecs. RTSP can be considered a
"remote control" for controlling the media stream delivered by a media server. RTSP
servers typically use RTP as the protocol for the actual transport of audio/video data.
RTSP Port:
Choose the RTSP port. The RTSP protocol allows a connecting client to start a video
stream. Enter the RTSP port number to use. The default value is 554.
RTP Port:
Specify the range of transmission port number of video stream. The default range is
50000 to 50999. User can specify a number between 1024 and 65535.
To Next Page
Loading...