Network Camera User’s Guide
44/96
SMTP Notification (e-mail):
If enable this function, then the “Send to“ and “Subject” fields need to be filled.
Send To:
Type the receiver’s e-mail address. This address is used for reply mail.
Subject:
Type the subject/title of the E-mail.
TCP Notification:
If enable this function, then the “TCP Server“, “TCP Port”, and “Message” fields need to
be filled.
TCP Server:
Type the server name or the IP address of the TCP server.
TCP Port:
Set port number of TCP server.
Message:
The message will be sent to FTP server.
HTTP Notification:
If enable this function, then the fields below need to be filled.
URL:
Type the server name or the IP address of the HTTP server.
To Next Page
Loading...