A&D MX-50 User Manual

English
A&D MX-50 / MF-50 Instruction Manual

A&D MX-50 Specifications

General

Capacity	51g
Readability	0.001g
Moisture Content Range	0.00 % to 100.00 %
Heating Method	Halogen lamp
Display	LCD
Calibration	External calibration
Interface	RS-232C
Operating Temperature	5°C to 40°C
Power Supply	100 V to 240 V AC, 50 Hz / 60 Hz
Pan Size	Ø 85 mm
Operating Humidity	85 % RH or less (no condensation)

Summary

Safety and Compliance

Precautions

2.1. During Use

Safety guidelines for operating the analyser during measurements.

Preparations (Installation, Motion Check)

5.1. Setting up the Instrument

Steps for installing and preparing the moisture analyser.

5.3. Self-Test Function (Motion Check)

Guide to performing the analyser's self-test for functionality.

Measurement Procedure

6.1. Standard Mode

Instructions for using the standard mode of measurement.

6.2. Operation

Detailed steps for operating the measurement process.

Selection of Measurement Method

Connecting to a Computer

Data Memory Function

10.1.1. Function Setting

10.1.2. Output All Data at One Time

Calibration

11.2. Calibration Adjustment of the Weighing Sensor

Steps to calibrate the weighing sensor using calibration masses.

11.3. Calibration of Drying Temperature for MX-50

How to calibrate the drying temperature using a temperature calibrator.

Maintenance

13.1.1. Replacement of the Halogen Lamp

13.2. Factory Settings

13.3. Troubleshooting

13.4. Error Messages