GB 19
English
– The analyser can also be connected to basic impact printer (DP-1012) using the
RS-232C interface. This also enables records to be produced which are compliant to GLP, GMP and
ISO standards.
GLP: Good Laboratory Practice,
GMP: Good Manufacturing Practice,
ISO: International Organisation for Standardisation
– Use the standard DP-1012 balance cable.
Printer Setting List
Purpose
Analyser settings
DP-1012 settings
Prt 5-d info
Data for GLP, GMP and ISO 0, 1, 2 0 1 Data bits 7
Parity Even
Baud-rate 2400
Country U.K.
Print mode Text
Auto-off Disabled
Emulation Standard
DTR Normal
Refer to "12. Function Table" for detail of settings.
Read the instruction manual of the printer.
Compact dot-matrix printer (DP-1012)
To Next Page
Loading...
